This is a tutorial to enable video sharing support on Centos servers.

This should install ffmpeg, mplayer, mencoder, flvtool2, yamdi, x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid, mediainfo, mp4box, neroaacenc . These tools will enable on your server:

• video and audio conversion
• thumbnail generation
• FLV meta injection (flvtool2, yamdi)
• extra codecs (x264, theora, mp3lame, vorbis, ogg, faac, faad2, xvid)

This is functional and we update it each time we configure a new server.
Installation is done using the “root” account.

Attention: If you copy and paste commands below, make sure “-” are not converted to “.”.  If these get converted, edit “.” back to “-”. Some options use 2 * “-”.

Some prerequisites:

yum install gcc gcc-c++ automake autoconf libtool yasm git subversion
yum install zlib-devel libmad-devel libvorbis-devel libtheora-devel lame-devel faac-devel a52dec-devel xvidcore-devel freetype-devel
yum install libogg zlib-devel libtool

rpm -ivh  http://rpm.livna.org/livna-release.rpm

yum install yasm
yum install libogg libogg-devel libvorbis libvorbis-devel


The quick way to setup ffmpeg, mplayer, mencoder:

rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.5.1-1.el5.rf.i386.rpm

or if you have 64bit server

rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.2-2.el5.rf.x86_64.rpm

yum -y install ffmpeg ffmpeg-devel mplayer mencoder ffmpeg-libpostproc

Edit the /etc/ld.so.conf file and add the following lines:

/usr/local/lib
/usr/lib

GIT
(required to get X264)

yum install curl-devel expat-devel gettext-devel openssl-devel zlib-devel

cd /usr/local/src

wget http://www.kernel.org/pub/software/scm/git/git-1.6.0.4.tar.gz

tar -zxvf git-1.6.0.4.tar.gz

cd git-1.6.0.4

make prefix=/usr/local all

make prefix=/usr/local/ install

git –version

cd /usr/local/src
wget http://www.kernel.org/pub/software/scm/git/git-manpages-1.6.0.4.tar.gz
cd /usr/local/share/man
tar -zxvf /usr/local/src/git-manpages-1.6.0.4.tar.gz

cd /usr/local/src/

git clone git://git.videolan.org/x264.git
cd /usr/local/src/x264
./configure –enable-shared –prefix=/usr
make &&  make install
ls -s /usr/local/lib/libx264.so /usr/lib/libx264.so

cd /usr/local/src/

wget http://downloads.xiph.org/releases/theora/libtheora-1.1.1.tar.bz2

tar jxvf libtheora-1.1.1.tar.bz2

cd /usr/local/src/libtheora-1.1.1

./configure –prefix=/usr --enable-shared

make && make installls -s /usr/local/lib/libtheora.so /usr/lib/libtheora.so

cd /usr/local/src/

wget http://downloads.sourceforge.net/faac/faac-1.28.tar.gz

tar zxvf faac-1.28.tar.gz
cd /usr/local/src/faac-1.28

./configure –prefix=/usr
make && make install

cd /usr/local/src/
wget http://openjpeg.googlecode.com/files/openjpeg_v1_3.tar.gz
tar zxvf openjpeg_v1_3.tar.gz
cd OpenJPEG_v1_3

make && make install

ldconfig

cd /usr/local/src/
wget http://downloads.xvid.org/downloads/xvidcore-1.2.1.tar.gz
tar zxfv xvidcore-1.2.1.tar.gz
cd /usr/local/src/xvidcore/build/generic
./configure --enable-shared
make && make install

ls -s /usr/local/lib/libxvidcore.so.4.2 /usr/lib/libxvidcore.so.4.2

Before installing ffmpeg, setup some linking for scripts that look in certain locations for codecs:

ln -s /usr/local/lib/libavformat.so.50 /usr/lib/libavformat.so.50
ln -s /usr/local/lib/libavcodec.so.51 /usr/lib/libavcodec.so.51
ln -s /usr/local/lib/libavutil.so.49 /usr/lib/libavutil.so.49
ln -s /usr/local/lib/libmp3lame.so.0 /usr/lib/libmp3lame.so.0
ln -s /usr/local/lib/libavformat.so.51 /usr/lib/libavformat.so.51
ln -s /usr/local/lib/libavdevice.so.52 /usr/lib/libavdevice.so.52

ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so.0.3.10
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so.80
ln -s /usr/lib/libtheora.so.0.3.10 /usr/local/lib/libtheora.so
ln -s /usr/lib/libx264.so.80 /usr/local/lib/libx264.so

FFMPEG (download latest from SVN)

export TMPDIR=$HOME/tmp
export LD_LIBRARY_PATH=/usr/local/lib/

cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
cd /usr/local/src/ffmpeg/

./configure --enable-libfaac --enable-shared --enable-memalign-hack --enable-gpl  --enable-libtheora --enable-libmp3lame --enable-libopenjpeg  --enable-libvorbis --enable-libx264 --enable-libxvid --enable-nonfree --enable-postproc --enable-avfilter --enable-swscale
make && make install

ln -s /usr/local/bin/ffmpeg /usr/bin/ffmpeg

FFMPEG configure options use 2 x “-”.

MPLAYER

cd /usr/local/src/
svn checkout svn://svn.mplayerhq.hu/mplayer/trunk mplayer
cd /usr/local/src/mplayer
svn update
cd /usr/local/src/mplayer
./configure && make && make install

ln -s /usr/local/bin/mencoder /usr/bin/mencoder
ln -s /usr/local/bin/mplayer /usr/bin/mplayer

FLVTOOL2
First install Ruby from WHM.

cd /usr/local/src/
wget rubyforge.org/frs/download.php/9225/flvtool2_1.0.5_rc6.tgz
tar zxvf flvtool2_1.0.5_rc6.tgz
cd /usr/local/src/flvtool2_1.0.5_rc6/
ruby setup.rb config
ruby setup.rb setup
ruby setup.rb install

YAMDI

cd /usr/local/src/
wget http://downloads.sourceforge.net/project/yamdi/yamdi/1.4/yamdi-1.4.tar.gz?use_mirror=ufpr
tar zxf yamdi-1.4.tar.gz
cd yamdi-1.4
gcc yamdi.c -o yamdi -O2 -Wall
mv yamdi /usr/bin/
yamdi -h

INSTALLATION RESULTS

mencoder: /usr/local/bin/mencoder
mplayer: /usr/local/bin/mplayer
yamdi: /usr/bin/yamdi

Add these shortcuts to /usr/bin if you need these there by default:
mencoder to /usr/local/bin/mencoder
mplayer to /usr/local/bin/mplayer

SuPHP fix

With suphp  “env -i” is required when executing php scripts.

exec(“env -i /usr/bin/php ” . $cmd.  ‘>/dev/null &’);

MediaInfo

http://mediainfo.sourceforge.net/en/Download/CentOS

wget http://downloads.sourceforge.net/zenlib/libzen0-0.4.14-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/zenlib/libzen0-devel-0.4.14-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/libmediainfo0-0.7.32-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/libmediainfo0-devel-0.7.32-1.i386.CentOS_5.rpm
wget http://downloads.sourceforge.net/mediainfo/mediainfo-0.7.32-1.i386.CentOS_5.rpm
rpm -vi libzen0-0.4.14-1.i386.CentOS_5.rpm
rpm -vi libzen0-devel-0.4.14-1.i386.CentOS_5.rpm
rpm -vi libmediainfo0-0.7.32-1.i386.CentOS_5.rpm
rpm -vi libmediainfo0-devel-0.7.32-1.i386.CentOS_5.rpm
rpm -vi mediainfo-0.7.32-1.i386.CentOS_5.rpm

ln -s /usr/bin/mediainfo /usr/local/bin/mediainfo

MP4Box

yum -y install freetype-devel SDL-devel freeglut-devel

wget -c http://mirror.ffmpeginstaller.com/source/gpac/gpac-full-0.4.5.tar.gz

tar -xzf gpac-full-0.4.5.tar.gz
cd gpac

./configure –prefix=/usr/local/cpffmpeg/ –extra-cflags=-I/usr/local/cpffmpeg/include/ –extra-ldflags=-L/usr/local/cpffmpeg/lib –disable-wx –strip

make && make lib &&  make apps && make install lib && make install

cp bin/gcc/libgpac.so /usr/lib

ln -s /usr/local/cpffmpeg/bin/MP4Box /usr/local/bin/MP4Box
ln -s /usr/local/cpffmpeg/bin/MP4Box /usr/bin/MP4Box

install -m644 bin/gcc/libgpac.so /usr/local/lib/libgpac.so
chmod +x /usr/local/lib/libgpac.so
ldconfig

neroAacEnc

wget ftp://ftp6.nero.com/tools/NeroDigitalAudio.zip
unzip NeroDigitalAudio.zip -d nero
cd nero/linux
sudo install -D -m755 neroAacEnc /usr/local/bin

ln -s /usr/local/bin/neroAacEnc /usr/bin/neroAacEnc

uploadprogress

cd /usr/local/src
wget http://pecl.php.net/get/uploadprogress-1.0.0.tgz
tar -zxvf uploadprogress-1.0.0.tgz
cd uploadprogress-1.0.0
phpize
./configure && make && make install

Edit /usr/lib/php.ini and add:

extension = “uploadprogress.so”

ASM is a modular assembler, it is required by the x264 package.

codec:$ wget \
http://www.tortall.net/projects/yasm/releases/yasm-0.7.0.tar.gz
codec:$ tar zfvx yasm-0.7.0.tar.gz
codec:$ cd yasm-0.7.0
codec:$ ./configure
codec:$ make && make install
codec:$ cd ..